How to Install 2015-2018 Mustang Anderson Composites Side Skirt

Today I’m going to show you how we installed our enters and deposits custom side skirts. These custom rocker panel side skirts from Andersen composites will be direct replacements for the factory plastic pieces on all 2015 to 2017 Mustangs. They’re made of real carbon fiber and have a high gloss finish.

Get the clips and metal rivets off, pull the splash shield off put it from the top with a drill, it’s going to take a pair of cutters just slide them up and cut the rivet. Remove letting holding skirts on, pull it from the body.

It’s getting somewhat lined up and just slide it in, we’re going to put the stud in from the bottom. You can tighten the nut down, doesn’t be super tight just snug enough that doesn’t move and reinstall the panel and these push clips, do the same thing in the back

Put a bolt up through it she just keeps up I open the top a little bit easier, it was a hardware installed Nemec go back grab the original Christmas tree clips put them all up into place in order to line and splash it up at the bottom, install the front clip everything mounted.

The final step, reinstall the factory winglets on the back lift the trim ease a little bit, make them clear repeat the process in the other side and installations finished.

Leave a Reply

Your email address will not be published.

%d bloggers like this: